Buying Suryadev TMT Bars? Here’s Today’s Price Update in Chennai
Fe 550 · 8 mm to 20 mm · Per Ton & Per Kg · Why Check Today’s Price · Buying Steps · 6 FAQs
Order: +91 9384819295 / +91 9384819297 | sales@buildiyo.store
Quick Answer
QUICK ANSWER
Suryadev TMT bars are available in Fe 550 grade from 8 mm to 20 mm. The rate is flat at ₹56,000 per ton across 12–20 mm, stepping up for the two smallest diameters because thinner sections cost more per unit weight to roll. That works out to ₹56.00 to ₹58.00 per kg. Prices are indicative and change with market conditions, order quantity, availability, transport distance, taxes and delivery location.
Need Suryadev TMT bars for your Chennai project?
Fe 550 · 8 mm to 20 mm · Test certificate on request · Site delivery
Suryadev TMT Bars Today Price in Chennai
Price Last Updated: [INSERT DATE BEFORE PUBLISHING]
| Suryadev TMT Bar | Grade | Size | Price per Ton |
|---|---|---|---|
| Suryadev TMT Bar | Fe 550 | 20 mm | ₹56,000 |
| Suryadev TMT Bar | Fe 550 | 16 mm | ₹56,000 |
| Suryadev TMT Bar | Fe 550 | 12 mm | ₹56,000 |
| Suryadev TMT Bar | Fe 550 | 10 mm | ₹57,000 |
| Suryadev TMT Bar | Fe 550 | 8 mm | ₹58,000 |
⚠ PLEASE CONFIRM BEFORE ORDERING
The rates above are indicative and provided for guidance only. TMT steel prices in Chennai change with market conditions, order quantity, stock availability, transportation distance and applicable taxes, and can move within a single week. Rates are quoted per metric ton (1,000 kg). GST at the prevailing rate and delivery charges are confirmed at the time of quotation. Please contact our team for the current price applicable to your requirement and delivery location before placing an order.
What Is Suryadev Fe 550 TMT Steel?
📖 DEFINITION
TMT stands for Thermo-Mechanically Treated. During manufacture, hot-rolled bars are rapidly quenched on the surface and then allowed to cool more slowly at the core, producing a hard, strong outer layer around a softer, ductile centre. That combination gives TMT bars both high strength and the ability to bend without cracking. Fe 550 refers to the grade — a minimum yield strength of 550 newtons per square millimetre.
A higher grade carries more load for the same cross-section than Fe 415 or Fe 500, which can allow a design to use less steel overall — useful where reinforcement congestion is a concern. It remains workable enough for normal bending and binding on site. Grade selection should always follow your structural drawings. You can view the full listing on our Suryadev Steel price in Chennai page, or compare across brands on our buy TMT steel online collection.
Price List by Size
Per-kg figures below are derived from the per-ton rate at 1,000 kg to the metric ton. They are handy for quick estimating, but steel is quoted and invoiced by the ton — use the per-ton column when comparing quotations.
| Size | Price / Ton | Approx. / kg | Common Applications |
|---|---|---|---|
| 8 mm | ₹58,000 | ₹58.00 | Stirrups, ties, chairs and slab distribution steel |
| 10 mm | ₹57,000 | ₹57.00 | Slab reinforcement, lintels, stirrups in smaller members |
| 12 mm | ₹56,000 | ₹56.00 | Slabs, beams, staircases and columns in smaller structures |
| 16 mm | ₹56,000 | ₹56.00 | Columns, beams and footings as loads increase |
| 20 mm | ₹56,000 | ₹56.00 | Columns, heavy beams and foundations |
NOTE ON LARGER DIAMETERS
This list runs from 8 mm to 20 mm. Heavier sections such as 25 mm, commonly used in raft and pile foundations, large columns and long-span beams, are not included. If your bar bending schedule calls for them, confirm availability separately or ask about alternative brands — running short of a single diameter is enough to hold up a pour.
Factors Affecting Steel Prices
Understanding the drivers explains why a rate quoted last month may not hold today.
Raw material and scrap costs
Iron ore, sponge iron and scrap feed directly into mill costs and are the single largest influence.
Energy and fuel prices
Steel making is energy-intensive, and fuel also drives the cost of moving material to Chennai.
Mill output and supply
Production levels, maintenance shutdowns and regional supply balance affect both availability and rate.
Construction demand and season
Demand typically firms in the dry building months and eases during heavy monsoon periods.
Order quantity
Full-load tonnage is normally rated differently from small part-load orders.
Bar diameter
Thinner sections cost more per unit weight to roll, which is why 8 mm sits above 20 mm on this list.
Transport and delivery location
Distance, site access and unloading arrangements all feed into the delivered price.
Taxes and statutory charges
GST at the prevailing rate applies and is confirmed on the quotation.
Full-load tonnage? Rates differ from part-load orders
Share your tonnage for a full-load rate · Chennai site delivery
Why Check Today’s Price Before Buying
Steel is one of the few construction materials whose price genuinely moves week to week, and that has practical consequences for anyone ordering against a budget prepared earlier.
A rate quoted a month ago may no longer hold in either direction. If it has risen, ordering against the old figure produces a shortfall exactly when tonnage is largest. If it has fallen, an outdated estimate quietly overstates your budget and hides savings you could have taken elsewhere. Neither is dramatic on its own, but steel is usually among the largest single material line items on a residential build, so a modest percentage movement is a real number.
Three habits help:
- Ask for a fresh quotation rather than reusing an old one.
- Note how long the quoted rate stays valid, since steel quotations are normally issued for immediate confirmation rather than held open.
- Re-check before each major order where a project runs across several months, rather than pricing the whole schedule once at the start.
How to Choose the Right TMT Bar
Bar sizes, spacing, lap lengths and cover are engineering decisions taken by a qualified structural engineer using your loads, spans and soil conditions. Substituting a smaller diameter to reduce cost, or changing spacing on site, can compromise the structure in ways that are invisible until they matter. Use the application column above to understand what you are buying, not to revise a design. When comparing brands at the same grade, our ARS today steel price in Chennai listing is a useful reference point alongside Suryadev — but compare on your actual size-wise tonnage rather than the headline figure for one diameter.
How to Buy Suryadev TMT Bars in Chennai
Identify the required sizes and tonnage
Work from the bar bending schedule or structural drawings, listing each diameter separately with its tonnage.
Check the latest price
Call, email or view the current listing online. Rates move, so use a current figure rather than an older quotation.
Confirm grade and specifications
Verify the grade matches your drawings, and ask about the manufacturer test certificate supplied with the consignment.
Check availability for every diameter
Particularly if your schedule includes sizes above 20 mm, which are not on the current list.
Compare delivery and transportation charges
Confirm whether transport and unloading are included, and whether your site takes a full-length vehicle.
Order against a final written quotation
Confirm rate, tonnage, taxes, delivery date and site address in writing before releasing the order.
BUYING FOR A FULL PROJECT?
Steel is rarely ordered alone. You can order cement, aggregates, blocks and concrete alongside your TMT requirement: buy cement online, Sand & Aggregates Collection, Bricks & Blocks Collection, Ready Mix Concrete and P sand today price in Chennai. Browse everything at construction materials online. Consolidating deliveries usually reduces transport cost per item.
Last Month’s Rate Is Not Today’s Budget
Steel is usually one of the largest line items on a residential build. A stale quote either leaves you short at peak tonnage or hides savings you could have used elsewhere. Re-check before every major order.
Other Materials for Your Chennai Project
Suryadev, Sangam, ARS and other Fe 550 brands, all diameters.
Browse steel →OPC, PPC and PSC from ACC, UltraTech, Dalmia, Ramco and more.
Browse cement →M-Sand, P-Sand and 20mm jelly for Chennai construction.
Browse sand →M20 to M40 grades for slabs and columns.
Browse RMC →Consolidate deliveries and cut transport cost per item
Steel, cement, sand, blocks and RMC — one supplier, one schedule
Frequently Asked Questions
Conclusion
Suryadev Fe 550 TMT bars are currently listed at ₹56,000 per ton from 12 mm to 20 mm, ₹57,000 for 10 mm and ₹58,000 for 8 mm — ₹56.00 to ₹58.00 per kg. Because steel is priced against a moving market, treat any published figure, including this one, as a guide and confirm before ordering. When comparing quotes, normalise on unit of measure, taxes, delivery and grade, and check stock for every diameter on your schedule. The Suryadev TMT bar price today is best confirmed by a direct quotation for your specific requirement.
Get today’s Suryadev TMT bar price
Share your bar bending schedule or size-wise tonnage and we will confirm the current rate, availability and delivery charges for your site — usually the same day.
Call +91 9384819295 · +91 9384819297
Email sales@buildiyo.store
Or reach us via Contact us · buildiyo.store
