Pulkit Steel Today Price in Chennai: Latest TMT Bar Price List 2026
Fe 550 Grade · 8 mm to 25 mm · Size Guide · Price Drivers · How to Compare Quotes · 6 FAQs
Order: +91 9384819295 / +91 9384819297 | sales@buildiyo.store
Quick Answer
QUICK ANSWER
Pulkit Steel TMT bars are available in Fe 550 grade across 8 mm to 25 mm. Smaller diameters carry a higher rate because they cost more to roll, which is why 8 mm sits above 25 mm. Prices shown are indicative and change with market conditions, order quantity, availability, transport distance, taxes and delivery location. Confirm the applicable rate and unit of measure before ordering.
Need Pulkit TMT bars for your Chennai project?
Fe 550 · 8 mm to 25 mm · Test certificate on request · Site delivery
Pulkit TMT Bar Price List, Chennai
Price Last Updated: [INSERT DATE BEFORE PUBLISHING]
| Pulkit TMT Bar | Grade | Size | Price |
|---|---|---|---|
| Pulkit Steel TMT Bar | Fe 550 | 25 mm | ₹69,000 |
| Pulkit Steel TMT Bar | Fe 550 | 20 mm | ₹69,000 |
| Pulkit Steel TMT Bar | Fe 550 | 16 mm | ₹70,000 |
| Pulkit Steel TMT Bar | Fe 550 | 12 mm | ₹70,000 |
| Pulkit Steel TMT Bar | Fe 550 | 10 mm | ₹70,000 |
| Pulkit Steel TMT Bar | Fe 550 | 8 mm | ₹71,500 |
⚠ PLEASE CONFIRM BEFORE ORDERING
The rates above are indicative and provided for guidance only. Steel prices in Chennai change with market conditions, order quantity, stock availability, transportation distance and applicable taxes, and can move within a single week. Unit of measure, GST at the prevailing rate and delivery charges are confirmed at the time of quotation. Please contact our team for the current price applicable to your requirement and delivery location before placing an order.
What Are TMT Bars?
📖 DEFINITION
TMT stands for Thermo-Mechanically Treated. During manufacture, hot-rolled bars are rapidly quenched on the surface and then allowed to cool more slowly at the core. This produces a hard, strong outer layer around a softer, ductile centre — a combination that gives TMT bars both high strength and the flexibility to bend without cracking. That balance is why they are the standard reinforcement for reinforced cement concrete construction.
Why Fe 550 Is Widely Used
The number in a grade designation refers to minimum yield strength in newtons per square millimetre. Fe 550 therefore carries more load per unit of cross-section than Fe 415 or Fe 500, which can allow a design to achieve the same capacity with less steel — useful on columns and beams where congestion is a concern. It remains workable enough for normal bending and binding on site. Grade choice should always follow your structural drawings. You can browse the full range at our Pulkit steel price in Chennai collection, or compare across brands on our buy TMT steel online page.
Pulkit TMT Bar Sizes and Where They Are Used
Applications below are typical rather than prescriptive — your structural drawings decide what goes where.
| Size | Common Applications | Notes |
|---|---|---|
| 8 mm | Stirrups, ties, chairs, slab distribution steel | Lightest section; used where bars must be bent frequently |
| 10 mm | Slab reinforcement, lintels, stirrups in small members | Common secondary reinforcement in residential work |
| 12 mm | Slabs, beams, staircases, columns in smaller structures | The most widely used size in independent house construction |
| 16 mm | Columns, beams, footings | Steps up where loads or spans increase |
| 20 mm | Columns, heavy beams, foundations | Used in larger residential and commercial frames |
| 25 mm | Heavy columns, raft and pile foundations, long-span beams | Selected for high-load and multi-storey applications |
What Moves TMT Steel Prices in Chennai
Understanding the drivers helps explain why a rate quoted last month may not hold today.
Raw material and scrap costs
Iron ore, sponge iron and scrap feed directly into mill costs and are the single largest influence.
Energy and fuel prices
Steel making is energy-intensive, and fuel also drives the cost of moving material to Chennai.
Mill output and supply
Production levels, maintenance shutdowns and regional supply balance all affect availability and rate.
Construction demand and season
Demand typically firms in the dry building months and eases during heavy monsoon periods.
Order quantity
Full-load quantities are normally rated differently from small part-load orders.
Bar diameter
Smaller sections cost more per unit weight to roll, which is why 8 mm carries a premium over 25 mm.
Transport and delivery location
Distance, site access and unloading arrangements all feed into the delivered price.
Taxes and statutory charges
GST at the prevailing rate applies and is confirmed on the quotation.
Full-load quantity? Rates differ from part-load orders
Share your tonnage for a full-load rate · Chennai site delivery
How to Compare Steel Prices Properly
A headline rate is not a comparable figure until you know what sits inside it. When you collect quotes, normalise them on four points before deciding.
- Unit of measure — confirm exactly what quantity the quoted figure covers.
- Taxes — whether the figure is inclusive or exclusive of GST.
- Delivery — whether transport to your site is included, and whether unloading is.
- Grade and brand — an Fe 500 rate is not comparable with an Fe 550 rate.
It is also worth comparing brands at the same grade before committing. Our ARS today steel price in Chennai listing is a useful reference point alongside Pulkit.
How to Buy Pulkit TMT Steel in Chennai
Identify the required sizes and quantity
Work from the bar bending schedule or structural drawings. List each diameter separately with its tonnage.
Check the latest price
Call, email or view the current listing online. Rates move, so use a current figure rather than an older quotation.
Confirm grade and specifications
Verify the grade matches your drawings, and ask about the manufacturer test certificate supplied with the consignment.
Compare delivery and transportation charges
Confirm whether transport and unloading are included, and whether your site is accessible to a full-length vehicle.
Check availability for your sizes
Confirm stock for every diameter you need, since one size being short can hold up a pour.
Place the order against a final written quotation
Confirm rate, quantity, taxes, delivery date and site address in writing before releasing the order.
BUYING FOR A FULL PROJECT?
Steel is rarely ordered alone. You can order cement, aggregates, blocks and concrete alongside your TMT requirement: buy cement online, Sand & Aggregates Collection, Bricks & Blocks Collection, Ready Mix Concrete and P sand today price in Chennai. Consolidating deliveries usually reduces transport cost per item.
Choosing the Right Bar for Your Project
Bar sizes, spacing, lap lengths and cover are engineering decisions taken by a qualified structural engineer using your loads, spans and soil conditions. Substituting a smaller diameter to reduce cost, or changing spacing on site, can compromise the structure in ways that are invisible until they matter. Use the size guidance above to understand what you are buying — not to revise a design. If you need materials for a project already under way, browse everything in one place at construction materials online.
A Quote You Can’t Compare Is Not a Quote
Unit of measure, GST, delivery, grade. Until all four are stated, a lower headline number tells you nothing. Normalise first, then choose.
Other Materials for Your Chennai Project
Pulkit, ARS and other Fe 500D / Fe 550 brands, all diameters.
Browse steel →OPC, PPC and PSC from ACC, UltraTech, Dalmia, Ramco and more.
Browse cement →M-Sand, P-Sand and 20mm jelly, quality-checked for Chennai construction.
Browse sand →M20 to M40 grades with mix-design documentation for slabs and columns.
Browse RMC →Consolidate your deliveries and cut transport cost per item
Steel, cement, sand, blocks and RMC — one supplier, one schedule
Frequently Asked Questions
Conclusion
Pulkit Steel Fe 550 TMT bars are currently listed from ₹69,000 for 20 mm and 25 mm, ₹70,000 for 10 mm to 16 mm, and ₹71,500 for 8 mm. Because steel is priced against a moving market, treat any published figure — including this one — as a guide and confirm before ordering. When you compare quotes, normalise them on unit of measure, taxes, delivery and grade, and check availability for every diameter on your schedule. The Pulkit TMT bar price today in Chennai is best confirmed by a direct quotation for your specific requirement.
Get today’s Pulkit TMT steel price
Share your bar bending schedule or size-wise quantity and we will confirm the current rate, availability and delivery charges for your site — usually the same day.
Call +91 9384819295 · +91 9384819297
Email sales@buildiyo.store
Or reach us via Contact us · buildiyo.store
